1. According to Material:

    a). whole tank is made of stainless steel (SUS304/SUS316L)

   b).stainless steel inner pot (SUS304/SUS316L), carbon steel jacket (Q235-  B), outer pot is treated with anti-rust paint.

2. According to Heating Type: there are Steam Heating and Electric Heating

3. According to Volume: there are 100L-1000L, also can be designed in accordance with customers’ requirements.

    The glue dissolving tank is made of stainless steel. The tank body is three layer structures of bladder, heating layer and thermal insulation layer. Mixing assembly is connected by shaft, composed by turning and reverse shunt type mixing pulp with smooth transmission and good homogeneous effect. Manhole (feeding mouth) adopts fast loading type, the thermometer, and vacuum table instrument compose observation control.

    It is the supporting equipment in glue, capsule ingredients, vacuum, condensation and other production process.

 

    This equipment has advantages of fast heating, strong constant temperature performance, smooth vacuum operation and stable performance. Internal and external tank are light and smooth, convenient for tear, maintenance and cleaning. It can speed up the speed of the melt glue, improve the glue liquid medium, adjust glue quality degrees etc, is the special equipment for capsule glue (ingredients) in pharmaceutical industry, vacuum stirring, melt glue and qualitative.

 

Notes

1. The nominal capacity and size in the chart is standard configuration. Any specific requirements, please point out.

2. The jacket working pressure≤ 0.09Mpa, also can be made according to customers’ requirements.

3. The process parameters that need provided when choosing the deployment tank: the nature of material, working pressure, temperature, specific requirements, etc.

1. File support: the structural size drawing of the device (PDF) and instructions are available.

2. Required by operated function, the following criteria are adopted to design, manufacture and test

A. << Standards for quality control of pharmaceutical production (Revised 1998)>> terms of Chapter IV 31-37;

B. << The Steel Pressure Vessel (GB150-1998)>>;

C. << The Steel Welding Normal Pressure Vessel (JB/T 4735-1997)>>;

D. << Food Machinery Safety and Heath (GB 16798-1997)>>.