1、Split colloid mill’s motor and gear grinding packed separately, through the pulley, the belt drive, so the speed of the grinding besides decided by motor rotate speed, also related to the two pulleys; it’s similar to the ten-speed bicycle.

2、Split colloid mill also called horizontal colloid mill, production is more complex than vertical colloid mill, design should consider when in the production of the colloid mill axial positioning, it’s in case the motor shaft axial dynamic touch tooth wear, preferably before the motor end cover bearing, because the design of the motor rotor and shaft axial thermal expansion in motor front bearing key to rear bearing direction, to reduce the influence on grinding head clearance.

3、Split colloid mills grinding’s speed is higher than motor rotate speed, so the production is corresponding big, even if the same model, the same power of motor, separation of production will also significantly greater than the vertical.

4、Split colloid mill due to separate motor and gear grinding, the heat generated in work noninterference, it’s easy to work long hours.

The process parameters that need provided when choosing the Colloid Mill: the nature of material, working pressure, temperature, specific requirements, etc.